Tip
When you record a program of a station whose name is labeled on this player, the station name is recorded automatically as the track name (page 21).
Notes
•After you stop recording,
do not disconnect the AC power cord or move the player while “TOC EDIT” is flashing in the display. If you do so, recording may not be done properly.
•If you turn up the volume too high, sound skipping may occur.
Tips
•To add track marks during recording, press REC where you want to add track marks.
•To record over the previous recording, see page 28.
•To add track marks after recording, see “Dividing recorded tracks” on page 34.
To pause recording
Press MD ^. Press the button again to resume recording. (On the remote, use MD Pinstead of MD ^.)
Recording from a CD
Track marks on the source CD are recorded on the same positions on the MD. Track marks are also added automatically on the MD when you pause recording.
If unnecessary track marks are added, erase them after recording (see ”Combining recorded tracks” on page 36).
1 Insert a CD.
2 Press CD pto activate the CD player.
3 Insert a recordable MD.
4 Press REC (ron the remote).
Recording does not start (recording standby mode).
5 Press MD ^(MD (or MD Pon the remote).
Recording will be made from the last recorded position.
6 Press CD ^.
To stop recording
Press MD p.
To pause recording
Press MD ^. Press the button again to resume recording. (On the remote, use MD Pinstead of MD ^.)
Recording
Recording 27GB