Erasing recordings (Erase Function) (continued)
Note
After you stop recording,
do not disconnect the AC power cord or move the player while “TOC EDIT” is flashing in the display. If you do so, recording may not be done properly.
Erasing all tracks on an MD
You can erase the disc name, all recorded tracks and their names at the same time. After you have erased all tracks on the MD, you can use it as a new MD.
1 While the player is stopped, press EDIT repeatedly until “All Erase” appears in the display.
2 Press ENTER•YES.
“Erase OK?” appears in the display. Once you have erased a track, you cannot recover it. Be sure to check the contents of the track you are trying to erase.
If you want to cancel the erase function at this point:
Press CANCEL•NO or MD p.
3 Press ENTER•YES.
After “TOC EDIT” disappears from the display, “Blank Disc” appears in the display, and all contents on the MD are erased.
32GB Editing recorded tracks on the MD