Editing recorded tracks on the MD
The name has been labeled on the MD.
Labeling a track
1 Play the track you want to label.
2 Press EDIT repeatedly until “Track Name” appears in the display.
3 Press ENTER•YES.
One-track repeat play starts. If the track name has been already labeled, the track name appears in the display.
4 Input the characters according to steps 4 through 8 of “Labeling an MD.”
The name has been labeled on the track.
After you stop recording,
do not disconnect the AC power cord or move the player while “TOC EDIT” is flashing in the display. If you do so, recording may not be done properly.
Press ENTER•YES.
Note
7 Repeat steps 4 through 6 to complete the entire name.
8
Cursor
The cursor shifts rightward and waits for the input of the next character.
Display
Press ÷.
Turn the jog dial counterclockwise or clockwise to select the characters.
5
6
Labeling recordings (Name function) (continued)

40GB