CDP-XE570
SECTION 4
TEST MODE
4-1. CHECK MODE
The following checks can be performed in the CHECK Mode.
• Offset value display
1.Turn on the set.
2.Put disc in the set.
3.Press the [PLAY MODE] , H and M buttons simultaneously.
4.The Offset measured values will be displayed as “AB 02 FE” (typical values).
• RFDC value display
1.Turn on the set.
2.Put disc in the set.
3.Press the [PLAY MODE], H and m buttons simultaneously.
4.The RFDC measured value will be displayed as “RFDC 65” (typical value). If there is no disc in the set, “RFDC NO” will be displayed.
4-2. AFADJ MODE
The following checks can be performed in the AFADJ mode, which is set by connecting the TP2 (AFADJ) terminal on DISPLAY BOARD to the Ground and turning on the power.
• FL tube check
After all segments light up, when the H button is pressed, the following will be displayed.
A B C D E F
The display will light up as follows when the l AMS L
knob is rotated to the right, and as follows when rotated to the left.
JOG RIGHT
JOG LEFT
When the OPEN/CLOSE A button is pressed, all will light up again.
• Key check
All buttons have corresponding button numbers. When a button is pressed, the counter will count up and display the button’s num- ber. However, the counter will only count to “15”. It will not count for buttons already pressed once, but will display the button’s number.
88 TOTAL= 88
X | X |
Display of button number | Display of counting |
When the x button is pressed, the following will be displayed.
| 2 |
| 4 |
|
|
|
|
|
|
6 |
| 8 |
| 10 |
| 12 |
| 14 |
|
|
|
|
|
|
16 |
| 18 |
| 20 |
|
|
|
|
|
Button | Buttton No. | Button | Button No. | |
Displayed | Displayed | |||
|
| |||
|
|
|
| |
X | 1 | PEAK SEARCH | 20 | |
|
|
|
| |
M | 8 | TIME EDIT | 21 | |
|
|
|
| |
m | 9 | PLAY MODE | 22 | |
|
|
|
| |
ENTER(AMS) | 10 | REPEAT | 23 | |
|
|
|
| |
TIME/TEXT | 16 | OPEN/CLOSE | All lit | |
|
|
| ||
FADER | 17 | A | ||
| ||||
|
|
|
| |
CLEAR | 18 | PLAY H | (ABCDEF) | |
|
|
|
| |
CHECK | 19 | STOP x | (Music Calendar) | |
|
|
|
|
• Remote commander check
When the “ H ” button is pressed, the display will light up as follows.
REMOCON PLAY
8
