![4-3. ADJ MODE](/images/new-backgrounds/10761/1076117x1.webp)
4-3. ADJ MODE
The following operations are performed in the ADJ mode, which is set by connecting the TP1 (ADJ) terminal to the Ground and turning on the power.
Table of Button Operations in ADJ Mode
The functions of the buttons are shown in the following table.
Function of Buttons
Button | Function |
TIME/TEXT | Tracking servo ON/OFF |
MOFFSET(VC)/EF.BIAS display
mOFFSET(RF,FE,TRK) display
CLEAR RFCK/GFS/ERROR RATE check mode
*NOTE : Other buttons are not used for servicing and should not be pressed without a reason.
[ DISPLAY BOARD ] – Conductor side –
TP2
AFADJ
GND | TP1 | |
ADJ | ||
|
lAMS L
S531
9