Ready Getting

Charging the Battery Pack

The battery pack is not fully charged at the time of purchase. Be sure to charge the battery pack before using the cell phone for the first time.

An AC adapter is not included. Purchase a specified AC adapter (sold separately).

100 V AC power outlet

Charge indicator

2

3

 

AC adapter

External connecting terminal

Connector 1

Connect a specified AC adapter to the cell phone with the battery pack attached.

Open the cover of the external connecting terminal. Check the shape of the connector of the AC adapter, and plug it straight into the external connecting terminal.

Unfold the power plug of the AC adapter and plug it into a 100 V AC power outlet.

Confirm that the charge indicator lights.

Charging: The charge indicator lights.

Charging finished: The charge indicator goes out.

Be sure to close the cover of the external connecting terminal when charging is finished.

Do not pull or twist the cover of the external connecting terminal forcibly.

Be sure to use the common AC adapter 02 (sold separately) when charging overseas.

Using Touch sensor

When the cell phone is closed, press oTouch sensor ON/OFF key to activate/cancel Touch sensor. While Touch sensor is activated, Touch sensor lights and you can perform operations with +/<=~>/K.

Touch sensor can be used only when the cell phone is closed. However, Touch sensor cannot be used when

the backlight is not lit. Press or cancel the key lock to light the backlight and use Touch sensor.

If you set the key lock by sliding Lock key when the cell phone is closed, Touch sensor cannot be used.

You cannot perform Touch sensor operations while making/receiving a call or during a call.

• When the standby screen is displayed, Use

to select Touch Sensor Guide and to check the Touch sensor operation guide.

8