Initial Setup of au Media Tuner
To watch TV (1Seg) using the au Media Tuner, you need to configure initial settings.
When the standby screen is displayed, press c.
➡Use ato select TV, press c(Select), use j to select TV (1Seg) and then press c(Select).
Disclaimer notes are displayed.
➡Use jto check the disclaimer notes, use j to select OK, and then press c(選択 [Select]).
The initial setting screen for using the au Media Tuner is displayed.
•Follow the
➡Use jto select オート設定（放送波） (Auto
(Broadcasting wave)) and then press c(選択 [Select]).
Automatic channel scanning begins. When receivable channels are found, the channel setup is completed.
•Select マニュアル設定 (Manual) to set the channel manually.
Watching TV (1Seg)
When the standby screen is displayed, press c.
➡Use ato select TV, press c(Select), use j to select TV (1Seg) and then press c(Select).
■To Change Channels
Use sto change channels.
You can select TV (1Seg) and EZ
TV (1Seg)
Change channels one by one.
1ch 
2ch … 12ch
EZ
Program 16 … Program 2 | Program 1 |
•Before using this feature, you must configure au Media Tuner initial settings (see the procedure on the left).
• Channels cannot be changed with when the data operation screen is displayed.
(1Seg) TV
43