Sony Ericsson GC89 Appendix A - Connection Parameters

Appendix A - Connection Parameters

General Connection Parameters for CSD and GPRS

Required	Useful information
Telephone	Number you need to dial to reach your service provider. Use the full
number or	number including country code and area code, e.g. +46 33 555 2525.
Access Point	Or
Name (APN)	The APN server resource to contact, for example,
	Interent.operator.net - to connect to the Internet via the mobile operator’s
	or your corporate Intranet via a VPN.
Bearer	You will need to know the bearer capability provided by your service
capability:	provider, so you can select the appropriate option during set up.
CSD or GPRS/
EDGE?
CSD Network	If you intend to create connections via CSD, contact your network operator
Speed	and check the supported speeds.
Username	The username your service provider gave you when the account was set
	up. Some dial-up accounts do not require a Username. In this case, leave
	the field blank.
Password	Password associated with the username, given to you by the service
	provider. Some dial-up accounts do not require a Password. In this case,
	leave the field blank.
IP assignment:	An ‘address’ that the service provider knows you by and uses to route
Server / Static	information to and from your GC89. Your IP address will either be:
	Server - assigned by the service provider when you connect.
	Static - assigned once by the service provider or the IT Manager.
	If your IP address is Static, you must enter it into IP address fields which is
	available when you select Advanced in the Connection Wizard.
DNS	This tells the GC89 where to find the service provider’s DNS Service.
assignment:	DNS translates addresses such as www.SonyEricsson.com to the numeric
Server / Static	IP address so that the information can be accessed.
	Like IP assignment above, the DNS can be static or allocated by the
	service provider when you connect. If static is selected, additional fields
	need to be completed containing the static information.

IP address	Only required if the IP assignment is static.
	Format example: 123.9.45.3.
	Do not enter any leading 0s when typing in IP address.
Primary DNS	Only required if the DNS assignment is static.
	Format example:123.9.45.2
Secondary DNS	Only required if the DNS assignment is static.
	Format example: 123.9.45.1
Access Point	If the APN is set to default you will have to enter the name of the access
Name (APN)	point your network operator is using.

Appendix A - Connection Parameters 103