Component

GC89 CD-ROM

Location

 

 

 

EDGE/GPRS Drivers on a

D:\Driver\Driver9x

Windows 98SE or ME machine

 

 

 

EDGE/GPRS Drivers on a

D:\Driver\Driver2k

Windows 2000/XP machine

 

 

 

Wireless LAN Driver (semwl5.inf) on a

D:\WLAN-2K

Windows 2000/XP machine

 

 

 

Wireless LAN Driver (semwl5a.inf) on

D:\WLAN-9x

a Windows 98SE/ME machine

 

 

 

In the above table, D is referred to as your CD drive.

Note:

When installing on Windows 98SE, Windows® may prompt for the original Windows 98SE CD- ROM to be inserted. If the CD-ROM is not inserted when requested, Windows® will subsequently reboot with error messages relating to missing files. Therefore, it is strongly recommended that the Windows 98SE CD-ROM is available before installation starts.

6.Select the driver file requested by the Wizard and click Open. The Hardware Wizard finishes the installation.

7.Select Programs Sony Ericsson Wireless Manager to start using your GC89.

Note:

If you are prompted to reboot the laptop during software installation, you may find that the Wireless Manager attempts to start before all of the drivers are installed. The reason this occurs is the New Hardware Wizard is still busy installing the 3 device drivers. The Wireless Manager splash screen appears, followed by a warning dialog saying “You must have a Sony Ericsson GC89 EGPRS Modem installed to run this application. Please install a Sony Ericsson GC89 EGPRS Modem and try again”. If this occurs:

1.Click Ok.

2.Wait for the New Hardware Wizard to complete the driver installation.

3.Reboot the laptop.

4.Start the Wireless Manager using the icon on the desktop or via Programs Sony Ericsson Wireless Manager.

Installation13