Windows® Error Codes

Windows® 98 (SE)

Error 619: The

An ISDN mode (V110 or V120) has been selected when creating a

port is

connection, but is not supported by the network.

disconnected

Select Analogue mode when creating the connection in the

during dial-up.

Connection Wizard.

 

 

Error 629: The

Telephony settings are set to pulse dialing, change to tone dialing.

port was

 

 

disconnected

Check the dialing settings for the current location (In Control

by the remote

Panel

Phone and Modem Option Dialing Rules

machine during

Location

Edit) and change the Dial using setting to tone, or (if

dial-up.

Pulse is a necessity), create a new location called EDGE

 

Anywhere and set the dialing to Tone. EDGE anywhere location

 

should then be used whenever you use the GC89.

 

 

Error 630: The

A Dial-up networking connection is already connected. Close the

port was

connected dial-up and try again.

disconnected

 

 

due to hardware

 

 

failure during

 

 

dial-up.

 

 

 

 

Error 645:

Incorrect APN or CID selected for network.

Internal

Modify your Dial-up Connection, see Create a Connection on page

authentication

21 for more details. Make sure that the APN file contains the name

error during

of the access point your network operator is using. The Dialup

dial-up.

Wizard should do this automatically. If you are experiencing

 

problems, contact your network operator.

 

 

Error 650: The

Incorrect User ID and/or password. Re-enter correctly.

Remote Access

 

 

server is not

 

 

responding

 

 

during dial-up.

 

 

 

 

Error 720: No

The service is not supported by the SIM. This usually appears

PPP control

when you are trying to connect to GPRS Internet. Contact service

protocols

provider to enable GPRS Internet access on SIM card.

configured

 

 

during dial-up.

 

 

 

 

 

Troubleshooting83