Sony Ericsson NWZ-A829 Usbsuspd, NANDRBZ1, Btxrst, Btpwrctl, Ncpwron, NANDRBZ2, BTLEDCTL2, AB0RDZ

NWZ-A826/A826K/A828/A828K/A829

Pin No.	Pin Name	I/O	Description
G23 to	AB0_D15 to AB0_D13	I/O	Two-way data bus with the USB controller
G25
G26	NC	-	Not used
H1	USBSUSPD	-	Not used
H2	NC	-	Not used
	SDR_DATA25,
H3 to H5	SDR_DATA27,	I/O	Two-way data bus with the SD-RAM
	SDR_DATA31
H8	NAND_RBZ1	O	Read/busy signal output to the NAND flash memory (NWZ-A828/A828K/A829 only)
H9	BT_XRST	O	Reset signal output to the bluetooth controller
H10	BT_PWRCTL	O	Power control signal output terminal for the bluetooth section
H11, H12	NC	-	Not used
H13	NC_PWRON	O	Power control signal output terminal Not used
H14, H15	NC	-	Not used
H16	AB0_WRZ	O	Write strobe signal output to the USB controller
H17	NC	-	Not used
H18, H19	AB0_A1, AB0_A2	O	Address signal output to the USB controller
H22 to	AB0_D8, AB0_D9,	I/O	Two-way data bus with the USB controller
H25	AB0_D7, AB0_D6
H26	NC	-	Not used
J1 to J3	IO_A	-	Not used
J4, J5	SDR_DATA29,	I/O	Two-way data bus with the SD-RAM
	SDR_DATA30
J8	NAND_RBZ2	O	Read/busy signal output to the NAND flash memory (NWZ-A829 only)
J9	BT_LEDCTL2	O	LED drive signal output terminal for the bluetooth indicator
J10	SPI_CS_SEL	O	Chip select signal selection signal output terminal Not used
J11 to J17	GND	-	Ground terminal
J18	NC	-	Not used
J19	AB0_RDZ	O	Read strobe signal output to the USB controller
J22 to J24	AB0_D10 to AB0_D12	I/O	Two-way data bus with the USB controller
J25	CHGGND1	-	Ground terminal
J26	NC	-	Not used
K1 to K3	VDD_L1	I	Power supply input terminal (+1.2V)
K4, K5	SDR_DATA28,	I/O	Two-way data bus with the SD-RAM
	SDR_DATA26
K8	NAND_RBZ3	O	Read/busy signal output to the NAND flash memory (NWZ-A828/A828K/A829 only)
K9	NAND_DA6	I/O	Two-way data bus with the NAND flash memory
K10 to K18	GND	-	Ground terminal
K19	NC	-	Not used
K22	LCD_HSYNC	O	Horizontal sync signal output to the liquid crystal display
K23	LCD_ENABLE	O	Enable signal output to the liquid crystal display
K24	LCD_VSYNC	O	Vertical sync signal output to the liquid crystal display
K25	CHGGND2	-	Ground terminal
K26	NC	-	Not used
	SDR_DATA23 to
L1 to L5	SDR_DATA20,	I/O	Two-way data bus with the SD-RAM
	SDR_DATA24
L8	SDR_DATA19	I/O	Two-way data bus with the SD-RAM
L9	NAND_DA4	I/O	Two-way data bus with the NAND flash memory
L10	GND	-	Ground terminal
L11	NC	-	Not used
L17, L18	GND	-	Ground terminal
L19	LCD_B1	O	RGB video (blue) signal output to the liquid crystal display
L22 to L25	LCD_B2 to LCD_B5	O	RGB video (blue) signal output to the liquid crystal display
L26	NC	-	Not used
M1 to M5	SDR_DATA18 to	I/O	Two-way data bus with the SD-RAM
	SDR_DATA14
M8	SDR_DATA13	I/O	Two-way data bus with the SD-RAM

37