Control panel > Connections >

This is the Internet version of the user’s guide. © Print only for private use.

–Devices that are within range but unknown are shown with a preset name.

4.Select the device you want your P910i to pair with, and enter a passcode when asked for it. When the passcode is accepted, the pairing process is complete, see ‘Passcodes’ on page 138.

5.If in the future you want to allow a paired device to connect to your P910i without you explicitly approving each connection, you should select Control panel > Connections > Bluetooth > Devices, then select a device and the check box

Allow to connect without confirmation.

To let another device initiate pairing with your P910i

1.In Control panel > Connections > Bluetooth > Settings, set Bluetooth to On.

2.Follow the other device’s manual to initiate pairing.

3.When asked for a passcode, enter the same on both devices.

4.If in the future you want to allow a paired device to connect

to your P910i without you explicitly approving each connection you should select

Bluetooth > Devices, select a device and the check box Allow to

connect without confirmation.

Tip You can change the name of a paired device. When you pair with other Bluetooth wireless technology enabled phones, it is very useful to include the user's name as part of the device name. This will make it very easy to beam information to the desired recipients.

To let a headphone initiate pairing with your P910i

1.Check that the device you want to pair with your P910i:

–Is on and within range.

–Has its Bluetooth function activated and that it is in visible mode.

2.In Control panel > Connections > Bluetooth > Settings, set

Bluetooth to On.

3.Follow the headphone’s manual to initiate pairing on the headphone.

4.In the Devices tab tap Add. Your P910i searches for all devices in the vicinity and lists them.

5.When asked for a passcode, enter the headphone’s passcode on your P910i.

6.If in the future you want to allow the headphone to connect to your P910i without you explicitly approving each connection, you should select Control panel > Connections >

Bluetooth > Devices, select the headphone and the check box

Allow to connect without confirmation.

To remove a paired device from your P910i

Select a device in the list and select Remove.

Connecting to other devices

137