Sony Ericsson P910i manual 161

This is the Internet version of the user’s guide. © Print only for private use.

Email account Inbox tab settings

Email account Outbox tab settings

Username

Password Incoming server address

Your Internet Service Provider (ISP) supplies you with your username, your password, and its incoming server address, which identifies the computer where your incoming email messages are stored.

Outgoing server	Your Internet Service Provider (ISP) supplies you
address	with its Outgoing server address, which identifies
	the computer through which your outgoing email
	messages are sent.
Use SMTP	Some SMTP servers might also require

Open in full	Select to open messages in full screen portrait
screen	view.
Download	If you want to limit the data traffic, you can choose
	to receive just Just headers (the sender, subject,
	and date only) or set a size limit (if a message is
	larger than the Smaller than limit, only the headers
	are downloaded). You can download the complete
	message later. You can also set a limit to the total
	number of messages held in your email account at
	any one time.
Schedule	Select Schedule to schedule an automatic
	download of your incoming email messages.
	Messages that are waiting in your Outbox will not
	be sent at the same time.

authentication	authentication when sending email. In that case,
	select the check box Use SMTP authentication and
	enter your User name and Password.
Use Inbox login	If the SMTP server accepts using your Inbox login
details	information for authentication, select the check
	box Use Inbox login details.
Email account Advanced tab settings
Secure	Your Internet Service Provider (ISP) will tell you
connection	whether you can use either a Secure connection or
	Secure password authentication.
Outgoing mail	Normally 25. Do not change unless your ISP
port	instructs you to.
Use MIME	MIME encoding is a standard that allows non-
encoding	textual information (for example graphics) and
	accented characters to be sent in email messages.
	If you should not wish to Use MIME encoding,
	clear the check box.

Control panel 161