This is the Internet version of the user’s guide. © Print only for private use.

Security

On the Settings tab you can set the Bluetooth security related settings of your P910i.

Bluetooth on All Bluetooth wireless technology functionality from your P910i works. Visibility according to the Visible to other devices setting.

Set Bluetooth to Off if you do not use Bluetooth, it will decrease battery drain. Bluetooth will automatically switch on if you use Send as > Bluetooth from the applications

Visible to Selected: All Bluetooth wireless technology other devices functionality from your P910i works.

Cleared: All Bluetooth wireless technology functionality from your P910i works but you cannot receive beamed items, and other devices cannot initiate pairing with your P910i.

Cable

Use Cable to set the cable connection mode and the connection parameters used when communicating through your P910i's cable port.

•Set the cable connection mode. Please note that you must set the mode to Modem when using the P910i as a modem and when using the DUN (Dial-up Networking) Wizard.

•Set the baud rate, parity, number of stop bits, character length and type of flow control required for the connection. When connecting your P910i via the SyncStation to a USB port on your PC, use the following (default) settings:

Baud rate

115200

Parity

None

Stop bits

1

Character length

8

Flow control

CTS/RTS

Tip You can set the cable connection mode when the flip is

closed by selecting Applications > Connections >

Cable.

GSM Networks

This option lets you choose what network to use when you are outside your operator’s area. Choose if you want to search for a new network or use a preferred one. You can also make a list of preferred networks.

•Search mode – Select between automatic or manual search for a network.

•Select network – Tap the button to get a list of available networks.

•New search – Tap the button to search for available networks.

154 Control panel