Sony Ericsson XR-C7500RX service manual Stop Loading Eject Brake

	Pin No.		Pin Name		I/O			Description
111			CD MD		I	Setting terminal for the internal mechanism CD or MD
						“L”: CD, “H”: MD (fixed at “L” in this set)
112				NC	I	Not used (fixed at “L”)
113			TUNON		O	Tuner system power supply on/off control signal output terminal
						“H”: tuner power on
114				NC	O	Not used (open)
115			REIN1		I	Dial pulse input of the rotary encoder (RE901) (A phase input)
						(for VOLUME/BASS/TREBLE/BALANCE/FADER control)
116			REIN0		I	Dial pulse input of the rotary encoder (RE901) (B phase input)
						(for VOLUME/BASS/TREBLE/BALANCE/FADER control)
117			NOSE-SW		I	Front panel block remove/attach detection signal input from the nose detection switch (S600)
						“L”: front panel is attached
118			DOORIND		O	LED drive signal output of the tape window illumination and Zindicator (LED801, LSW801)
						“H”: LED on	“H” is output to turn on LED when front panel is opened
119				VSS	—	Ground terminal
120			DOLBY		O	Dolby-B on/off select signal output to the CXA2510AQ (IC250) “H”: dolby on
	*1 Loading/tape operation motor control
				Mode		STOP	LOADING/	EJECT/	BRAKE
	Terminal						FORWARD	REVERSE
		LM-LOD (pin y; )				“L”	“H”	“L”		“H”
		LM-EJ (pin tl )				“L”	“L”	“H”		“H”

39