GoldMike MK2 13
Flair
As with its predecessor, the mo del 9844 GoldMike, the
GoldMike MK2 features our sound-optimi zing Flair circuit ry. This
circuitry takes advantage of a com bined coil and tube filtering
to enhance signal presence. In comparison to simple EQ manip-
ulation, this intensified presence s ounds very natural and un ob-
trusive, and is particularl y suited for optimizing the overtones
in voice and acoustic instrument s.
Through Flair, a recorded signal gain s richness in detail, pres-
ence, intelligibility (for voice) an d in an increased ability to cut
through in a mix. In such mixes, a F lair-processed signal st ands
out without resort to conventional pro cessing often unsuited to
the task, saving both time and a need f or artificial proc essing.
Flair works through an emphasis i n the 1.5-20 kHz range centere d
around 6 kHz.
The GoldMike MK2 provides for two different set tings, with a
“High” setting of +2.5 dB and a “Med.” with +1.5 dB emphasis.
An Off setting allows you to deac tivate the Flair cir cuit entirely.
Tube A mp
The Tube Amp switch varies the degree of tube pre-amplifica-
tion added to the discrete class A pre- amplification, which
itself is set with the Gain control . The switch allows for three
settings: +6 dB (standard) +12 dB and +18 dB. In each setting,
the output of the tube is automatically reduced in prop ortion
to the increased input, thus eliminating affects to the overall
output level - there is no need to recalibr ate. This allows for
instant comparison between varying Tube Amp values and their
sonic effects (see „ About Gain Adjustm ents” on page 10).
Control Elements
Off
FLAIR
Med
High
12
6
TUBE AMP
18 dB