Set the desired wordlength on the 328 with the rotary encoder.
<Tape Ch17->24 >
Wordlength: 24
Press the down cursor to set the port for 328 ADAT port B, as for port A, and again to set the wordlength for port B. Press <ENTER> to confirm the settings.
<Tape
<Tape
S/PDIF Input
The 328 S/PDIF input can be routed to any one of the following inputs:
Stereo Input 1, Stereo Input 2, FX Return 1, FX Return 2, 2 Track Tape Return,
providing that the AES/EBU input or oscillator has not already been assigned to that input.
Commonly the Dakota S/PDIF output would be routed to Stereo Input 2, or the 2 Track Tape Return input.
NOTE | Assigning a digital source to an input will override any analogue signal | |
present on that input. | ||
| ||
|
|
Press <MENU> to enter the menu pages, scroll through the pages until the ‘SPDIF I/P Setup’ is highlighted and press <ENTER>. Using the rotary encoder, select the destination for the S/PDIF input, and press <ENTER> to confirm the setting:
<SPDIF Input > Route To:
<SPDIF Input > Route To: 2TRK
<SPDIF Input > Route To:
<SPDIF Input > Route To:NOWHERE
NOTE | If the S/PDIF input is not required, NOWHERE should be selected in the | |
menu. | ||
| ||
|
| |
|
|
Dakota Setup Guide
5
