Programming Options
RF Programmer
The RF Programmer allows you to customize the system to fit the individual needs of the consumer, using a handheld device capable of transmitting system settings directly to the system control module. The RF Programmer is broken down into three different programming banks.
1.RF Programmer Bank- The RF Programmer Bank allows you to set up the base features of the system you are installing. It is very important to understand that the base features of this system can only be programmed using the RF Programmer. Please refer to the chart below showing factory default settings to determine what options need to be changed for your system. When using the RF Programmer to select feature settings is very important to verify that the correct base features remain at the default settings.
Feature | Default | |
Setting | ||
| ||
|
| |
Security | ON | |
|
| |
Remote Start | OFF | |
|
| |
1 Way/2 Way TX | 2 Way TX | |
|
|
2.Feature Bank 1- Feature Bank 1 allows you to turn On/Off customer convenience features.
3.Feature Bank 2- Feature Bank 2 allows you to turn On/Off remote start features.
Manual Feature Programming
After installation is complete it will be necessary to program certain system characteristics that can't be programmed using the RF Programmer (Shock Sensor settings). In addition all of the customer convenience features and remote start features.
