![](/images/new-backgrounds/1315104/31510469x1.webp)
For Machines Mfg. Since 8/09 | M A I N T E N A N C E | Model SB1021/SB1022 |
Lubrication
The bearings on your bandsaw are factory lubricated and sealed. Leave them alone unless they need to be replaced.
When needed, brush a light coat of
!
Grease
Figure 34. Upper wheel leadscrew lubrication.
Use
!Oil
Grease
Grease
Fitting
Behind
Plate
Grease Oil
Fitting
Figure 35. System lubrication points.
If the table becomes difficult to tilt, position it so that you can brush a thin coat of multi- purpose grease on the trunnion sliding surfaces (see Figure 36), then move
!
Trunnion Sliding
Surfaces
Figure 36. Trunnion lubrication.
The sliding surfaces on the guide post may occasionally need to be lubricated with a light machine oil if the movement becomes stiff.
!
Oil