Southbend SB1022, SB1021 manual Preparation Overview, Things Youll Need, Unpacking

For Machines Mfg. Since 8/09 P R E P A R A T I O N Model SB1021/SB1022

Preparation Overview

The purpose of the preparation section is to help you prepare your machine for operation.

The typical preparation process is as follows:

1.Unpack the machine and inventory the contents of the box/crate.

2.Clean the machine and its components.

3.Identify an acceptable location for the machine and move it to that location.

4.Level the machine and either bolt it to the floor or place it on mounts.

5.Assemble the loose components and make any necessary adjustments or inspections to ensure the machine is ready for operation.

6.Connect the machine to the power source.

7.Test run the machine to make sure it functions properly and is ready for operation.

Things You'll Need

During the setup process, operation, and maintenance of your machine, you'll need the following items:

For Lifting

ss!!FORKLIFT ORLOTHERTPOWERRLIFTINGHDEVICE rated for the weight of the machine.

ss,IFTINGT3TRAP or Chain (rated for at least 1000 lbs.)

For Power Connection

ss!!QUALIFIEDLELECTRICIAN TO ENSURETARSAFE and code-compliant connection to the power source. (Refer to Page 16 for details.)

For Assembly

ssCotton Rags

ssMineral Spirits ss 3AFETY 'LASSES

ss Oil Can with any General Machine Oil ss Blade Tension Tool

ss Grease Gun with any API GL 2 Grease ss Stiff Grease Brush

ss Phillips Screwdriver #2

ss &LOORO-OUNTING (ARDWAREI!S .EEDED ss Hex Wrench 5mm

ss Hex Wrench 6mm

ss Combo Wrench 1 ⁄2" or Ratchet and 1 ⁄2" Socket

Unpacking

This item was carefully packaged to prevent damage during transport. If you discover any damage, please immediately call Customer Service at (360) 734-1540 for advice. You may need to file a freight claim, so save the containers and all packing materials for possible inspection by the carrier or its agent.

-11-