Model SB1021/SB1022 | O P E R A T I O N | For Machines Mfg. Since 8/09 |
Operation Overview
The purpose of the operation section is to familiarize you with the basic controls, terminology, capabilities, and adjustments that are necessary to use this machine.
To better understand the remaining parts of this section, please take a moment to read this overview.
To reduce the risk of serious injury when using this machine, read and understand this entire manual before beginning any operations.
To complete a typical operation, the operator does the following:
1.Examines the workpiece to make sure it is suitable for cutting.
2.Checks to make sure blade tension is correct, and the blade guides are positioned correctly.
3.Marks the cut line on the workpiece.
Workpieces that cannot be stabilized from unexpected movement should not be cut with a vertical metal bandsaw due to the increased risk of the operator's hands slipping into the blade. Examples are chains, cables, balls, or workpieces with
4.Adjusts the upper blade guide height to approximately
5.Puts on safety glasses, and rolls up sleeves or secures any clothing or hair that could get entangled with moving parts.
Loose hair, clothing, or jewelry could get caught in machinery and cause serious personal injury. Keep these items away from moving parts at all times to reduce this risk.
During operation, small metal chips may become airborne, leading to serious eye injury. Wear safety glasses to reduce this risk.
6.Turns the bandsaw ON, and adjusts blade speed for the type of material being cut.
7.Presses the workpiece against the blade, using light and even pressure and following the cut line with the blade.
Depending on the workpiece material, the operator may squirt a small amount of cutting fluid at the cutting area to keep it from overheating and smoking.
8.Turns the bandsaw OFF.
