Visioneer 7600 SERIES manual Installing the 7600 USB Scanner, What YOU Need

2VISIONEER ONETOUCH 7600 SCANNER INSTALLATION GUIDE

Part 1: Installation

INSTALLING THE 7600 USB SCANNER

This section of the manual contains instructions for the OneTouch 7600 USB. Please see “Installing the 7600 Parallel Scanner” on page 8 if you’re using a OneTouch 7600 Parallel.

WHAT YOU NEED

To use the 7600 USB scanner and software, you need the following:

•IBM PC (or 100-percent compatible) Pentium or equivalent

•Microsoft Windows 98

•One available Universal Serial Bus (USB) port on your computer

•16 megabytes (MB) or more of available internal memory (RAM)

•35 MB of free hard disk space

•A VGA or SVGA monitor. Recommended settings for your monitor are as many colors as possible—High Color (16-bit), True Color

(24-bit or 32-bit). Set the resolution to at least 800 by 600 pixels. To set your monitor’s colors and resolution, open the Windows Control Panel, double-click Display, and then click the Settings tab.

•A CD-ROM drive

GETTING THE PAPERPORT SOFTWARE USER’S GUIDE

The CD also includes your PaperPort User’s Guide. This guide provides more detailed information about the PaperPort software’s features. Please see the CD to view or print the guide. The guide is also available at Visioneer’s web site at www.visioneer.com.