Visioneer 7600 SERIES manual Connecting the Scanner to the Computer

STEP 1: CONNECTING THE SCANNER TO THE COMPUTER 11

4.Plug one end of the scanner cable into the port on the back of the scanner marked “Host.”

5.Plug the other end of the scanner cable into the parallel port on the back of your computer.

On some older computers the serial port and parallel port both have 25-pin connectors that fit the scanner cable. Please make sure you plug the scanner cable into a parallel port.

6.If you unplugged a printer from the parallel port earlier, plug it into the “Printer” port on the scanner.