Problem | Solution | |
Phone displays | • | Place handset in base for 10 seconds to reset the |
RECHARGE |
| phone. If that doesn’t work, charge battery for 12 |
|
| hours. |
|
|
|
Memory Dialing | • | Did you program the memory location keys |
doesn’t work |
| correctly? |
| • Did you follow proper dialing sequence? | |
| • Make sure the tone/pulse setting is programmed | |
|
| correctly. |
|
|
|
Unit locks up and no | • | If the phone still does not work, disconnect the power |
communication between |
| cord and remove the battery pack. Then reconnect the |
the base and the handset |
| power cord and reinstall the battery pack. Place |
|
| handset in the base for 30 seconds to allow it to |
|
| reinitialize. |
| • | If a power outage occurs while the handset is away |
|
| from the base, the handset must be returned to the |
|
| base when the power returns. |
|
|
|
32
