8
WALL MOUNT INSTALLATION
Because it is necessary to charge
the handset for 12 hours prior to
connecting the phone for use the
first time, it is better to leave the
unit on a flat surface during initial
charge before attempting to hang it
on the wall.
1. Make sure the mounting bracket
is securely fastened.
2. Set RINGER switch to ON.
3. Place the handset in the base.
4. Connect the power supply cord
into the base and the other end
into an AC outlet. The CHARGE
light comes on, indicating the
battery is charging.
Allow the phone to charge
for 12 hours before using the
first time. If you don't
charge the phone properly
when you first set up the
phone, performance of the
battery will be compromised.
(Installation continued on the
following page.)
1
2
3
4
CAUTION: Use only the Thomson
5-4081 power supply that came with
this unit. Using other power
supplies may damage the unit.