SOYO SY-5SSM/5 Enable/Disable the Onboard Sound JP9, Clear CMOS Data JP5, Sound Settings

Hardware Installation

SY-5SSM & SY-5SSM/5 Quick Start Guide

Step 7. Enable/Disable the Onboard Sound (JP9)

The onboard audio features of your Motherboard are controlled by jumpers JP9 Choose the available sound options among the following table:

Sound Settings	JP9
Onboard Sound: Enable	short
Onboard Sound: Disable	open

Clear CMOS Data (JP5)

In some cases the CMOS memory may contain wrong data, follow the steps below to clear CMOS memory.

1.Clear the CMOS memory by momentarily shorting pin 2-3 on jumper JP5. This jumper can be easily identified by its white colored cap.

2.Then put the jumper back to 1-2 to allow writing new of data into the CMOS memory.

CMOS Clearing	Clear CMOS Data	Retain CMOS Data
JP5 Setting	Short pin 2-3 for a	Short pin 1-2
	few seconds to	to retain new
	clear the CMOS 1 2 3	settings	1 2 3

Note: You must unplug the ATX power cable from the ATX power connector when performing the CMOS Clear operation.

12