Hardware

Installation

 

 

SY-6VBA 133 Quick Start Guide

Step 6. Set the CPU Frequency

You do not need to set any jumper for the CPU frequency. Instead, CPU settings are changed through the BIOS [SOYO COMBO SETUP]. Please refer to Chapter 3 - Quick BIOS Setup for details on how to set the Slot 1 processor frequency.

Step 7. External Suspend Button (JP1)

Some cases come with a suspend button, insert the plug into JP1. In addition to this button, the system can also enter the suspend mode through your OS.

Note: Suspend mode only functions if your Power Management mode is APM. Make sure that the BIOS setting for Power Management is APM. Windows 98 can be installed with ACPI Power Management (default is APM), in this case suspend mode will not function either.

Step 8. Enable/Disable Power-On by Keyboard (JP10)

You can choose to enable the Power-On by Keyboard function by shorting pin 1-2 on jumper JP10, otherwise, short pin 2-3 to disable this function.

Power-On by

Enable

 

Disable

Keyboard

 

 

 

 

 

Short pin 1-2 to

 

Short pin 2-3 to

JP10 Setting

enable the

 

disable the

 

Power-On by

 

Power-On by

 

Keyboard function.

1 2 3

Keyboard function. 1 2 3

Important: When using the Power-On by Keyboard function, please make sure the ATX power supply can take at least 720mA load on the 5V Standby lead (5VSB) to meet the standard ATX specification.

Step 9. 5V Stand-by indicator LED (LED 1)

This LED is lit whenever the 5V Standby voltage coming from the ATX powersupply is available. If you have connected your ATX powersupply to the mains, LED 1 should be lit.

10

Page 10
Image 10
SOYO SY-6VBA 133 quick start Set the CPU Frequency, External Suspend Button JP1, Enable/Disable Power-On by Keyboard JP10