SOYO SY-6ZB manual Unpacking the Motherboard

Hardware Setup SY-6ZB

2-2 UNPACKING THE MOTHERBOARD

When unpacking the Motherboard, check for the following items:

ØThe SY-6ZB 440 ZX AGP/PCI Motherboard

ØThis Quick Start Guide *

ØThe Installation CD-ROM *

ØOne IDE Device Flat Cable

ØOne Floppy Disk Drive Flat Cable

ØOne bracket with one 9-pin serial connector, attached with 9- pin falt cable, and one 6-pin PS/2 mouse connector, attached with 6-pin cable.

ØOne bracket with one 25-pin connector parallel connector attached with 25-pin flat cable and one 9-pin serial connector attached with 9-pin flat cable.

*If your board comes with a driver disc and a paper manual, the Quick Start Guide and the CD-ROM are not included in the package.

Warning: Do not unpack the Motherboard from its anti- static packaging until you are ready to install it.

Like most electronic equipment, your Motherboard may be damaged by electrostatic discharge. To avoid permanent damage to components ground yourself while working by using a grounding strap. Otherwise, ground yourself frequently by touching the unpainted portion of the computer chassis to drain the static charges.

Handle the Motherboard carefully, holding it by the edges. You are now ready to start the installation.

7