SOYO SY-6ZB manual CPU Host Clock Select, CPU Ratio, CPU Warning, Temperature, Current System

BIOS Setup Utility			SY-6ZB
CHIPSET FEATURES SETUP (Continued)
CHIPSET	Setting	Description		Note
FEATURES

If [CPU Speed] is set to [Manual]

CPU Host Clock Select

66MHz

68MHz

75MHz

83MHz

100MHz

103MHz

112MHz

Select the host clock of your Pentium® II processor among these values.

Note: For the ZX chipset, 66 and 100 MHz host clock frequencies are acceptable. However, the system stability is not guaranteed for other frequencies due to the limitations of this chipset.

If [CPU Speed] is set to [Manual]

CPU Ratio	After you have selected the host clock, choose
	the right multiplier for the CPU. Options are: [2,
	2.5, 3., 3.5, 4, 4.5, 5]. The CPU frequency is
	then defined as [host clock freq.]x[multiplier],
	and should the working frequency of your
	Pentium® II processor.
CPU Warning
	Disabled		Default
Temperature	Enabled	Set CPU temperature from
		50°C to 70°C. The CPU will
		slow down when CPU
		temperature goes beyond
		the preset value. The CPU
		will continue to run slow
		until the temperature
		returns back within the safe
		range.
Current System
	°C/°F	Show the current status of
Temp.		the system temperature.
Current CPU	°C/°F	Show the current status of
Temperature		CPU temperature.

42