![](/images/new-backgrounds/1264629/26462959x1.webp)
Hardware Setup |
|
3. Select [CHIPSET FEATURES SETUP]
Move the cursor to the [CPU Frequency] field to set the CPU
frequency, as shown in the following display.
|
| ROM PCI/ISA BIOS |
|
|
| |
|
| SOYO COMBO SETUP |
|
| ||
|
| AWARD SOFTWARE, INC. |
|
| ||
CPU Frequency |
| : 350Mhz(100*3.5) | CPU Warning Temperature | : Disabled | ||
CPU Host/PCI Clock | : 100/33MHz |
| System Temp. | : 24°C/75°F | ||
CPU Ratio |
| : x 3.5 |
| CPU Temperature | : 29°C/84°F | |
AGP Clock |
| : Auto |
| CPUFAN Speed | : 6553 RPM | |
|
|
|
| CHAFAN Speed | : 6553 RPM | |
|
|
|
| : 2.78 V | VTT(V) | : 1.50V |
|
|
|
| 3.31 V | +5 (V) | : 4.97V |
|
|
|
| .84V | : | |
CPU Frequency | : 350Mhz(100*3.5) | 4.88V |
|
| ||
In Suspend | : Enabled | |||||
CPU Host/PCI Clock | : 100/33MHz |
|
|
|
| |
CPU Ratio | : x 3.5 |
|
| − ↓ → ← : Select Item | ||
AGP Clock | : Auto |
|
| |||
|
| |||||
| Values | (Shift) F2 : Color | ||||
|
|
|
| BIOS Defaults |
| |
|
|
| F7 : Load Setup Defaults |
|
Available [CPU Frequency] settings on your
CPU Frequency
|
| 233MHz (66 x 3.5) |
| 350MHz (100 x 3.5) |
|
|
| ||
|
|
|
|
|
|
| 266MHz (66 x 4.0) |
| 400MHz (100 x 4.0) |
|
|
|
|
|
|
| 300MHz (66 x 4.5) |
| 450MHz (100 x 4.5) |
|
|
|
|
|
|
| 333MHz (66 x 5.0) |
| 500MHz (100 x 5.0) |
|
|
|
|
|
|
| 366MHz (66 x 5.5) |
| 550MHz (100 x 5.5) |
|
|
|
|
|
|
| 400MHz (66 x 6.0) |
| 600MHz (100 x 6.0) |
|
|
|
|
|
|
| 433MHz (66 x 6.5) |
|
|
|
|
|
|
|
Select the working frequency of your Pentium® III, Pentium® II, Celeron™ processor among these preset values.
Note: Mark the checkbox that corresponds to the working frequency of your Pentium® III, Pentium® II, Celeron™ processor in case the CMOS configuration should be lost.
Note: if you use Bus Frequencies of 75 MHz, make sure that your PCI cards can cope with the higher PCI clock.
4. Select [SAVE & EXIT SETUP]
Press <Enter> to save the new configuration to the CMOS memory,
27