SY-K7VEMPRO V1.0 Quick Start Guide

1 Introduction

Congratulations on your purchase of the SY-K7VEMPRO V1.0 Motherboard. This Quick Start Guide illustrates the steps for installing and setting up your new Motherboard.

This guide provides all users with the basic steps of Motherboard setting and operation. For further information, please refer to the SY-K7VEMPRO V1.0 Motherboard Users’ Guide that came with your Motherboard.

Unpacking

When unpacking the Motherboard, check for the following items:

The SY-K7VEMPRO V1.0 VT8361 PCI Motherboard

The Quick Start Guide

The Installation CD-ROM

SOYO Bonus Pack CD-ROM

One IDE Device ATA 66 Flat Cable

One Floppy Disk Drive Flat Cable

One Heat Sink Compound

One Serial port flat cable with a 9-pin connector

Introduction

3

Page 3
Image 3
SOYO SY-K7VEMPRO V1.0 quick start Introduction