SOYO SY-K7VTA manual Jumper Setting, GND Ø Pay special care to the directionality, Off

Hardware Installation SY-K7VTA

Please install the ATX power according to the following pin assignment:

ATX Power

12V

5VSB

PW-OK

GND

5V

GND

5V

GND

3.3V

3.3V

5V

5V -5V

GND

GND Ø Pay special care to the directionality.

GND PS-ON GND -12V 3.3V

2-3.4 Jumper Setting

Ratio Adjustment Setting (RJ1)

Refer to the following table to set the Frequency Multiplier of your CPU.

Frequency	J2	J3	J4
Multiplier Setting
Auto	1-2	1-2	1-2
Manual	2-3	2-3	2-3

If you set ratio to manual and configure the RJ1 jumper to the settings that match your CPU speed as follow table.

RJ1	1	2	3	4	RJ1	1	2	3	4
5	on	off	on	on	9	off	off	on	on
5.5	on	off	on	off	9.5	off	off	on	off
6	on	off	off	on	10	off	off	off	on
6.5	on	off	off	off	10.5	off	off	off	off
7	off	on	on	on	11	on	on	on	on
7.5	off	on	on	off	11.5	on	on	on	off
8	off	on	off	on	12	on	on	off	on
8.5	off	on	off	off	12.5	on	on	off	off

Note: SOYO does not guarantee system stability if the user over clocks the system. Any malfunctions due to over-clocking are not covered by the warranty.

42