Hardware Installation

SY-K7VTA

2-3.5 CMOS Clearing (JP5)

After you have turned off your computer, clear the CMOS memory by momentarily shorting pins 2-3 on jumper JP5, for a few seconds. Then restore JP5 to the initial 1-2 jumper setting in order to recover and retain the default settings.

Jumper JP5 can be easily identified by its white colored cap.

CMOS

Clear CMOS Data Retain CMOS Data

Clearing

JP5 Setting

Short pin 2-3 for

at least 5 seconds to clear the CMOS

1 2 3

Short pin 1-2 to retain new settings

1 2 3

Note: You must unplug the ATX power cable from the ATX power connector when performing the CMOS Clear operation.

43

Page 47
Image 47
SOYO SY-K7VTA manual Cmos Clearing JP5, Clearing JP5 Setting