BIOS Setup Utility |
|
sensor pins, to avoid the power off. Users may press the “Insert” key to jump over the “Power Off” mode; go to the BIOS and disable “FOC”. Now system can be booted normally.
4.The power connector of the CPU fan must be connected to the specified “CPU Fan Connector” on the motherboard to secure the normal functioning of the system.
We provide the following
2.CPU Socket Sticker : Users will find a sticker on the CPU socket,
which reminds them of the correct usage of the K7 CPU.
3.Heat Dissipation Paste: Heat Dissipation Paste is included for all
capability.
Furthermore, we strongly recommend our users to enable the function of H/W monitoring in the BIOS. This function, together with the FOC, provide the total protection to the CPU and allow it to maximize its performance.
Mark your CPU Frequency: Record the working frequency of your CPU that should be clearly marked on the CPU cover.
200MHz FSB DDR transfer on Athlon
| 750 MHz (100 x 7.5) |
| 800 MHz (100 x 8.0) |
| 850 MHz (100 x 8.5) |
| 900 MHz (100 x 9.0) |
| 950 MHz (100 x 9.5) |
| 1GHz (100 x 10.0) |
| 1.1GHz (100 x 11.0) |
| 1.2GHz(100 x 12.0) |
| 1.3 GHz (100 x 13.0) |
|
|
|
|
|
|
|
|
200MHz FSB DDR transfer on Duron
| 600 MHz (100 x 6.0) |
| 650 MHz (100 x 6.5) |
| 700 MHz (100 x 7.0) |
| 750 MHz (100 x 7.5) |
| 800 MHz (100 x 8.0) |
| 850 MHz (100 x 8.5) |
| 900 MHz (100 x 9.0) |
| 950 MHz (100 x 9.5) |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
266MHz Front Side Bus DDR transfer on Athlon
| 1 GHz (133 x 7.5) |
| 1.13 GHz (133 x 8.5) |
| 1.2 GHz (133 x 9.0) |
| 1.33 GHz (133 x 10.0) |
|
|
|
| ||||
|
|
|
|
|
|
|
|
23
