Select between 12: or 24: mode by pressing the "MODE" button. Press the "FUNCTION" button to set the mode.
The hour digit will now begin flashing. Press the "MODE" button to adjust the hour digits and press the "FUNCTION" button to set. The minutes will flash and can be adjusted by pressing the "MODE" button. (Hold the "MODE" button to scroll through the digits quickly) Press the "FUNCTION" button to set the minutes and return to clock mode
Note: The minute hand of the analog clock has twelve segments and can only display time in
The hand will not jump to the next segment until the digital clock reaches whole
(e.g., 12:05, 12:10, 12:15, etc.) (See figure 8)
FIGURE 8: SHOW CLOCK SCREEN
5. Timer Selection
The timer can be selected for either Automatic Timer Mode (ATM) or Timer Mode (TM). The ATM selection allows you to keep track of your actual riding time. The timer only operates when the wheel is rotating and cannot be turned on or off manually.
The TM selection is just like a conven- tional stopwatch. The timer is activated
manually and records the time whether the wheel is rotating or not. Tapping the "FUNCTION" button starts and stops the stopwatch and holding the "FUNCTION" button for three seconds will reset to stopwatch.
Note: The average speed (AVS) will be calculated differently based upon the selection of ATM or TM. If ATM is selected, the AVS is based upon only
FIGURE 9: ATM/TM SCREEN
riding time. If TM is selected the AVS is based on the total time the stopwatch is turned on or activated. (See figure 9) To select between ATM and TM, first press the "MODE" button until "ATM"
appears on the
6. Interval Timer
Your Speedzone Comp is also equipped with an Interval Timer. This feature allows you to customize your training by integrating a programma- ble repeating countdown timer into your workout. To enter the interval
10 | 11 |
