Specialized CR2302 manual Auto Start/Stop Timer ATM, Timer Mode TM, Interval Timer hourglass icon

FIGURE 12: MAXIMUM SPEED SCREEN

Auto Start/Stop Timer (ATM)

The stop watch function will operate only when there is speed input and records the actual time spent riding. Pressing the "FUNCTION" button for 3 seconds will reset the ATM display to zero.

Timer Mode (TM)

In TM mode the stopwatch function will operate when the "FUNCTION" button

14

is pressed. The stopwatch will record the total time after the button is pressed regardless of whether there is speed input or not. The average speed (AVS) will be calculated based on the time the timer mode is activated.

Interval Timer (hourglass icon)

The interval timer will display on the lower line of the screen when the hour- glass appears on the left. The timer will indicate you are reaching the end of a cycle with one beep per second for the last 5 seconds of an interval. This is followed by a continuous three-second beep as the interval timer repeats.

Trip Distance (DST)

Trip distance mode will record up to

999.99miles or kilometers and then roll to zero. The trip distance function can

FIGURE 13: TRIP DISTANCE SCREEN

be reset by pressing the "FUNCTION" button for three seconds. The resolution is 0.01 miles (0.01 Kilometers). The trip distance is shown on the lower line if the screen. (See figure13)

Odometer (ODO)

The odometer will record the total distance traveled up to 99,999 miles

or kilometers and then roll to zero. The odometer can be reset by pressing the "FUNCTION" button for three seconds. The total distance is shown on the lower line if the screen. (See figure 14)

Programmable Odometer

The odometer digits are user settable. This is convenient for transferring your hard-earned mileage that is usually

FIGURE 14: ODOMETER SCREEN

15