Speco Technologies CVC5815DNVW, CVC5915DNVW instruction manual Defect

③Move the arrow indicator to WIDTH to make desired width of cells to increase or decrease by using the Left / Right button between the level 0 ~ 100.

④Move the arrow indicator to HEIGHT to make desired height of cells to increase or decrease by using the Left / Right button between the level 0 ~ 100.

⑤Move the arrow indicator to the LEFT / RIGHT and TOP / BOTTOM to select the desired area positon by

using the LEFT or RIGHT button.

⑥Move the arrow indicator to COLOR to select the desired color of each area cells by using the Left / Right button to select between the 15 different color.

RETURN : Move the arrow indicator to RETURN after completing the setup to return to SPECIAL menu.

4-3) SYNC : INT (Internal Synchronisation)

Move the arrow indicator to RETURN after complete the setup to return to SETUP menu.

5. DEFECT

You can eliminate white spots (defect) up to max 128 point.

SENSE-UP : To eliminate defect, set the high level of sense-up. You can set to max 64x, but 32x is best to eliminate defect.

DIFF : You can set the size of DEFECT from 1 to 6.

START : Press the "ENTER" button, it will start to eliminate defects "PROCESSING NOW..." will be displayed on the monitor.

In case of manual IRIS lens, you should cover the lens.

DEFECT

SENSE-UP DIFF START RETURN

x32

4

RET

COVER THE LENS

THEN

PRESS ENTER KEY

PROCESSING NOW...

- 34 -