*RETURN:

Select Return to save the changes in the EXPOSURE menu and retun to the SETUP menu.

NOTE

*Pressing the SET button in AUTO mode allows adjustment of image brightness by increasing or decreasing the shutter speed (x2 ~x256).

*The higher the level, the brighter the image becomes, but it is possible that an after image (ghosting) could appear.

*When SENS-UP is activated the increased magnification can induce noise and pixelation; this is quite normal.

Back Light(BLC)

This camera witch is using 3D-DNR DSP provides intelligent light level control to overcome

even strong backlight conditions.

BLC

 

 

 

 

GAIN

MIDDLE

AREA

 

 

 

 

 

 

 

 

 

 

 

 

DEFAULT

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

RETURN

RET

*OFF: BLC function does not operate.

*BLC: Select LOW/MID/HIGH

User can select and define a specific area in scene and view the area clearly.

Press the "ENTER" button at the AREA menu, you can change the area like a picture 1.

Press the "ENTER" button again after area setting, you can change the area like a picture 2.

Default: Press the Default to return to factory defaults.

- 20 -

Page 21
Image 21
Speco Technologies CVC5915DNVW, CVC5815DNVW instruction manual Back LightBLC, Return