System Piping schematic
Use the 1/2 inch nylon tubing between the pump module Outlet and the Clark Pump
Flush water from ship’s pressure water system 25 psi (2bar) minimum
From the Clark pump brine dis- charge connector use the supplied 5/8 (15.9mm) clear braided vinyl hose to the brine overboard fitting.
Mount the pressure gauge in the low pressure inlet gauge tee.
Use the 1/2inch braided hose between the Flush module and the Feed Pump Module
From the Boost Pump to the 20 micron filter inlet us the 3/4 inch ID braided hose.
From the inlet thru hull to the boost pump mod- ule use the supplied clear 3/4 (19mm) spiral suction rated hose.
12
