Brine Discharge
Route the Brine discharge from the quick disconnect fitting to a location above the waterline using the supplied 5/8 hose.
Fresh Water Flush
Quick Disconnect Fitting
Run a feed line from the domestic cold pressure water system to the 1/2 hose barb on the fresh water flush assembly. This needs to be pressurized when the boat is unattended for the fresh water flush system to function properly. The domestic fresh water pump must be able to deliver 1.5 gallons per minute (6lpm) at 25 PSI. Connect the wiring harness and heat shrink butt splices.
To Flush water Inlet on pump module manifold
Fresh water from boat’s pressure water system
15
