SpectronIQ PHT-300X user manual Setting Up the System, To set up the system

OMPHT300X-1.book Page 3 Thursday, August 10, 2006 8:19 PM

Setting Up the System

The following is the procedure for setting up your home theater system, complete with 5.1 channel surround sound system.

To set up the system:

1.Set the player in its intended location.

2.Connect the five speakers to the five AUDIO OUTPUT terminals on the back of the subwoofer. For each speaker, connect the wire with the white stripe on it to the – terminal, and connect the other wire to the + terminal. For example, for the center speaker, connect the white-striped wire to CEN– and the other to CEN+.

To connect a wire, press down the tab, insert the wire, then release the tab to capture the exposed end of the wire.

3.Using the speaker cables, connect the the 5.1 channel audio outputs on the back of the player to the associated AUDIO INPUT connectors on the back of the subwoofer. The outputs on the player have the same layout as the inputs on the subwoofer, but rotated.

You can also use the auxiliary input above the 5.1 channel terminals (labeled L and R) to connect a separate audio source to the speaker system.

					AUDIO
5.1CH	CEN	FL	Y	Pb/Cb	COMPONENT	Pr/Cr	S-VIDEO	OPTICAL OUTPUT
SL

CAUTION

2.1CH

SWITCH

5.1CH

AUDIO INPUT

LR

FL FR

CEN	SW
SL	SR

	AUDIO OUTPUT
FR–	FR+
FL–	FL+
		ON
CEN–	CEN+
SL–	SL+	OFF
SR–	SR+

120V

3