Assembly Instructions XE295
STEP 1: CONSOLE MAST ASSEMBLY
•Locate the Console Mast (12) and Console Mast Cover (41) and slide the Cover onto the mast as far as it will go. Make sure the Console Mast Cover is facing the correct way.
•Unravel and straighten out the Computer Cable (31) and feed it into the bottom of the console mast tube and out of the top opening.
•Install the Console Mast into the receiving bracket in the top of the Main Frame. NOTE: there is one bolt already installed in the receiving bracket that will engage with the slot at the bottom of the Console Mast. This needs to be tightened at the end along with the three other console mast bolts.
•Put one 3/8" x 2T Split Washer (96) onto the 3/8" x
13 | XE195 / XE295 Elliptical |
|