Spirit XE 195, XE 295 owner manual Plastics Assembly

STEP 4: PLASTICS ASSEMBLY

•Install the Connecting Arm Covers (2 each 57 & 57-1 and 58 & 58-1) over the connection of the rod end and Handle Bars with the M5 x 15mm Screws (87) and 3.5x10m/m Self Tapping Screws (105) by using the Short Phillips Screw Driver.

•Install the two Wheel Covers (52) using the four M5x15m/m Phillips Head Screws (105).

•Locate the two Rear Stabilizer Covers (19,20) and two Middle Stabilizer Covers (19,20) for the Rear Rail Assembly and install with four M5 x 15m/m Screws (105). Then install front stabilizer cover (49) with two M5 x 15m/m Screws (105).

•Install the Front Handle Bar Covers (54-1 left, 55-1 right) and Rear Handle Bar Cover (54 left, 55 right) over the Handle Bar axle connections with the six 3.5x10mm Self Tapping Screws (87).

•Install the front (122) and rear (121) console mast covers with three M5 x 15m/m Screws (105) and two 3.5x12m/m Sheet Metal Screw (87).

16 XE195 / XE295 Elliptical