Setup
Setting up the Aura SoHo™ Conference Phone
1. Plug the power cord into the Wall Adapter.
2.Insert the power supply plug into an available electrical outlet.
3.Connect one end of the included phone cable into the Phone Connector port on on the Wall Adapter.
4.Connect the other end of the phone cable into a telephone phone jack located, for example, on the wall.
IMPORTANT: Do not plug the Aura SoHo™ Conference
6
Setup
Phone into a digital phone network or it may damage the unit. You will need a Digital Phone Adapter Module in order to use the Aura SoHo™ Conference Phone with a PBX, available for purchase on our website, www.spracht.com.
5.Connect one end of the included Main Cable into the Main Cable Connector port on on the Wall Adapter. IMPORTANT: Please use only the cable provided. The Main Cable is different from a
network cable. Using an incorrect cable will cause the Aura SoHo™ Conference Phone to malfunction.
6.Connect the other end of the Main Cable into the Main Cable Connector jack on the Aura SoHo™ Conference Phone.
7.Attach Wall Adapter to the wall or a desk, using the included screws or adhesive strips, if necessary.
8.Place the Aura SoHo™ Conference Phone in the center of a conference table or a desk free from obstructing materials.
9.You are now ready to make calls. Press the Power On/Off button for a dial tone and dial a number to make a call.
7
