![](/images/new-backgrounds/1249649/249649115x1.webp)
The display confirms that the number has been dialed when it shows “Connecting...”.
TousespeeddialforSprintPCSReadyLinkcalls:
From standby mode, press the appropriate key, and
then press . (See “Assigning Speed Dialing for Sprint PCS Ready Link Entries”on page 202.) The display confirms that the number has been dialed when it shows
Note: Speed dialing is notavailable when you are roaming; when you are roaming off the Nationwide SprintPCS Network, you mustalways dial using 11 digits (1 + area code + number).
Using Abbreviated Dialing
Abbreviated Dialing is similar to speed dialing. It allows you to dial a number by entering the last four or five digits of any number in your Contacts directory. This feature becomes available when you enable Abbreviated Dialing and program a
ToplaceacallusingAbbreviatedDialing:
1.Enter the last four or five digits of the prefix phone number.
2.Press .
Note: If the digits match more than one entry, the Abbrev. Dial listwill be
displayed; selectthe correctentry and press again.
Tip: You can also place a call by pressing Options (rightsoftkey) >Abbrev.Dial after step 1 above.