SSS AF9 manual Danger, Cleaner description, How to use, Grounding instructions

Cleaner description

12 1

	2
		2
3	17	18
	15
16
	5	4
13
	6	2
	7	14

9

10

8

1211

12The assembled cleaner will look like the drawing.

1.Handle

2.Cord hooks: wrap cord around hooks for storage. The top hook can be rotated right or left for easy cord release.

3.Hose

4.ON/OFF Switch: located on left rear corner of cleaner body.

5.Carrying handle

6.Bag door

7.Stair cleaning handle: located on lower edge of bag door.

8.Handle release lever: step on lever to lower to operating or low positions.

9.Headlight

10.Nozzle control knob: slide

knob to correct setting for height of carpet being cleaned.

11.Furniture guard: helps prevent cleaner from marking furniture.

12.Edge groomers

13.Wands

14.Final exhaust filter

15.Dusting brush

16.Crevice wand: stores inside of extension wand.

17.Furniture nozzle

18.Hose hook

How to use

Operate cleaner only at voltage specified on data plate on bottom of cleaner.

WARNING: Electric shock could occur if used outdoors or on wet surfaces

Grounding instructions

This appliance must be grounded. If

13it should malfunction or breakdown, grounding provides a path of least

resistance for electrical current to reduce the risk of electric shock. This appliance is equipped with a cord having an equip- ment-grounding conductor (C) and grounding plug (A). The plug must be plugged into an appropriate outlet (B) that is properly installed and grounded in accordance with all local codes and ordi- nances.

DANGER –

Improper connection of the equipment- grounding conductor can result in the risk of electric shock. Check with a qualified

13

A

C B

electrician or service person if you are in doubt as to whether the outlet is properly grounded. Do not modify the plug provid- ed with the appliance - if it will not fit the outlet have a proper outlet installed by a qualified electrician. This appliance is for use on a nominal 120 volt circuit and has a grounding plug that looks like the plug illustrated in sketch (A).

A temporary adapter (D) may be

14 used to connect this plug to a 2-pole receptacle (E) if a property grounded outlet is not available. The temporary adapter

14

D

F

G

E

should be used only until a properly grounded outlet (B) can be installed by a qualified electrician. The green colored rigid ear, lug, or the like (F) extending from the adapter must be connected to a per- manent ground (G) such as a properly grounded outlet box cover. Whenever the adapter is used, it must be held in place by a metal screw.

Note: In Canada, the use of a tempo- rary adapter is not permitted by the Canadian Electrical Code.

4