STORAGE
1.To store the Magnetic Fusion 7100 Bike, simply keep it in a clean dry place.
2.Adjust the SEAT FRAME(7) to the lowest position. The Magnetic Fusion 7100 Bike is approximately 53 1/4 inches long x 24 1/2 inches wide x 51 3/4 inches tall. These dimensions will vary. Please measure your Magnetic Fusion 7100 Bike if exact dimensions are needed.
3.To move the Magnetic Fusion 7100 Bike, lift the REAR STABILIZER(6) and the bike will roll on the WHEELS(103) on the FRONT STABILIZER(102).
4.To avoid damage to the electronics, remove the batteries before storing the Magnetic Fusion 7100 Bike for one year or more.
MAINTENANCE
The safety and integrity designed into the Magnetic Fusion 7100 Bike can only be maintained when the Magnetic Fusion 7100 Bike is regularly examined for damage and wear. Special attention should be given to the following:
1.Use the UP and DOWN buttons on the COMPUTER(26) to select a program and verify that the Magnetic System provides different tensions. The Magnetic System should provide many years of use.
2.Use a wrench to verify that the pedals are tightened securely. If tightening is required, remember that the left pedal has left hand threads and is tightened by turning counterclockwise. The right pedal has right hand threads that are tightened by turning clockwise.
3.Verify that the WARNING LABEL(95) is in place and easy to read. Call Stamina Products immediately at
4.It is the sole responsibility of the user/owner to ensure that regular maintenance is performed.
5.Worn or damaged components shall be replaced immediately or the Magnetic Fusion 7100 Bike removed from service until repair is made.
6.Only Stamina Products supplied components shall be used to maintain/repair the Magnetic Fusion 7100 Bike.
7.Keep your Magnetic Fusion 7100 Bike clean by wiping it off with an absorbent cloth after use.
18
