After connections have been made between the GX5500S and the GPS, a small satellite icon will appear on the top right corner of 
the LCD display. To see additional GPS information press 
and hold the [H/L(NAV)] key until the GX5500S shows 
the SOG and COG.
From the Factory the GX5500S shows GPS satellite time or UTC time when a optional GPS is connected. A time offset is needed to show the local time in your area.
1. Press and hold down the [CALL(MENU)] key until “Radio Setup” menu appears.
2. Press the [ENT] key, then select “Time Offset” with
the CHANNEL selector knob. 3. Press the [ENT] key. 4. Turn the CHANNEL selector knob to select time off-
set from UTC. See illustration below to find your offset time from UTC. If “00:00” is assigned, the time is the same as UTC (Universal Time Coordinated or GMT Greenwich Mean Time).
5. Press the [ENT] key to store the time offset.
6.Press the [CLR] key to return to the “Radio Setup”
menu, then press the [CLR] key again to return to radio operation.
OFFSET TIME TABLE
Page 12 |
| GX5500S |
|