Set the radio show UTC time or local time with the offset inputted in section 8.5
CHANGING THE GPS TIME.
1. Press and hold down the [CALL(MENU)] key until “Radio Setup” menu appears.
2. Press the [ENT] key, then select “Time Display” in
the “Radio Setup” menu with the CHANNEL selector knob.
3. Press the [ENT] key.
4. Turn the CHANNEL selector knob to select “UTC” or “Local.”
5. Press the [ENT] key to store the selected setting.
6.Press the [CLR] key to return to the “Radio Setup” menu, then press the [CLR] key again to return to radio operation.
8.7CHANGING COG TO TRUE OR MAGNETICAllows the GPS Course Over Ground to be selected to show in True or Mag- netic. Factory default is True however following the steps below the COG can be changed to Magnetic.
1. Press and hold down the [CALL(MENU)] key until “Radio Setup” menu appears.
2. Press the [ENT] key, then select “Magnetic” in the
“Radio Setup” menu with the CHANNEL selector knob.
3. Press the [ENT] key.
4. Turn the CHANNEL selector knob to select “Magnetic ” or “True.”
5. Press the [ENT] key to store the selected setting.
6.Press the [CLR] key to return to the “Radio Setup” menu, then press the [CLR] key again to return to radio operation.
GX5500S |
| Page 13 |
|