SAFETY PRECAUTIONS

Tool operators and maintenance personnel must always comply with the safety precautions given in this manual and on the stickers and tags attached to the tool and hose.

These safety precautions are given for your safety. Re- view them carefully before operating the tool and before performing general maintenance or repairs.

Supervising personnel should develop additional pre- cautions relating to the specific work area and local safety regulations. If so, place the added precautions in the space provided in this manual.

This tool will provide safe and dependable service if operated in accordance with the instructions given in this manual. Read and understand this manual and any stickers and tags attached to the tool before operation. Failure to do so could result in personal injury or equip- ment damage.

•Operator must start in a work area without bystanders. The operator must be familiar with all prohibited work areas such as excessive slopes, dangerous terrain con- ditions, and rail traffic.

•Establish a training program for all operators to ensure safe operation.

•Do not operate the tool unless thoroughly trained or under the supervision of an instructor.

•Always wear safety equipment such as goggles, ear, head protection, and respiratory protection at all times when operating the tool.

•Do not inspect or clean the tool while the battery power source is connected. Accidental arcing can cause seri- ous injury.

•Do not load brazing pins or ceramic rings while the bat- tery power source is connected. Accidental arcing can cause serious injury.

•Do not use the tool while it is connected to a battery charger.

•Ensure battery charging is only done in a dry environ- ment. Charging batteries in the rain or near standing water presents an electrocution hazard. Read the safe- ty and operation instructions provided with the battery charger before using the battery charger.

•Do not operate a damaged, improperly adjusted, or in- completely assembled tools.

•To avoid personal injury or equipment damage, all tool repair, maintenance and service must only be performed by authorized and properly trained personnel.

•Do not exceed the rated limits of the tool or use the tool for applications beyond its design capacity.

•Always keep critical tool markings, such as labels and warning stickers legible.

•Always replace parts with replacement parts recom- mended by Stanley Hydraulic Tools.

•Charging the battery can only be carried out between 0°C to +45°C (32°F to 113°F).

EPX10 User Manual ◄ 5

Page 4 Page 6
Page 5
Image 5
Stanley Black & Decker EPX10 user manual Safety Precautions
Page 4 Page 6

EPX10 specifications

The Stanley Black & Decker EPX10 is an innovative power tool designed to deliver both efficiency and performance, making it a popular choice among professionals and DIY enthusiasts alike. With its robust design and cutting-edge features, the EPX10 is tailored for a variety of applications, primarily focusing on enhancing productivity in both residential and industrial settings.

One of the standout characteristics of the EPX10 is its powerful motor, which provides exceptional torque and speed. This motor allows users to tackle tougher tasks with ease, from drilling through dense materials to driving screws into hard surfaces. The EPX10 features variable speed settings, which enables users to adjust the speed based on the specific application, thereby improving control and precision.

The design of the EPX10 prioritizes user comfort and ergonomics. It boasts a lightweight construction that reduces fatigue during prolonged use. The rubberized grip ensures a secure hold even in challenging conditions, allowing for better maneuverability and handling. Additionally, the compact size of the tool makes it convenient for accessing tight spaces, a significant advantage for intricate tasks.

Incorporating advanced technology, the EPX10 is equipped with a powerful lithium-ion battery, which offers longer run times and shorter charging periods compared to traditional batteries. This means users can work longer without interruptions, enhancing overall productivity. The battery management system also provides real-time feedback on battery status, preventing unexpected downtimes.

The EPX10 also comes with an integrated LED work light, illuminating the work area and allowing users to work in low-light conditions comfortably. This feature is particularly useful for projects in dimly lit environments where visibility is critical.

Safety is another key consideration in the design of the EPX10. The tool is built with protective features to minimize the risk of accidents, including a safety lock mechanism that prevents accidental starts. This ensures a safe working environment and instills confidence in users as they operate the tool.

In summary, the Stanley Black & Decker EPX10 is a versatile, powerful, and user-friendly tool that stands out in the market. With its combination of a high-performance motor, ergonomic design, advanced battery technology, and safety features, it is well-equipped to meet the demands of various projects while enhancing the user experience. Whether for professional use or home improvement tasks, the EPX10 is designed to deliver reliability and performance every time.
Top Page Image Contents